Welcome To Vacdepot On-Line
www.vacdepot.org
DIY VACUUM CLEANER SYSTEMS
  You Can Do It. We Can Help..
Home CVS-I 9 DECO Inlet Install Kit w-Tube U09200DV

Order the CVS-I U09200DV On Vacdepot!

CVS-I 9 DECO Inlet Install Kit w-Tube
The U09200DV install kit from CVS-I is a deco style 9 universal inlet central vacuum installation kit with 200ft of vacuum tube and your choice of solid color, matte finish or metallized universal inlet doors. The U09200DV is designed for both new construction and retrofit for existing applications of 4050sqft up to 5850sqft in coverage. CVS-I kits includes the highest quality tube, fittings and components necessary for a standard central vacuum installation. All CVS-I vacuum tube and regulated fittings conform to the ASTM-2158 standard and meet IAPMO/UMC standards.

Universal inlets, also called standard-connect inlets, pig-tail inlets or low-volt inlets, include the suction hose connection and also the low-volt signal wire connection which activates the vacuums suction motor. Universal inlets can be used with straight-air, no-volt, low-volt and universal dual-volt hoses. See the article Central Vacuum Hoses & Inlets in the articles tab for more information about the available hose and inlet configurations. Our DV series install kits include the Profyle universal inlet in one of the seven available colors. The Profyle inlet imparts a unique style on what is too often a common eyesore. While design and style have advanced in the last four decades, many of the central vacuum inlets have not. The Profyle Inlet brings sophistication to the utility, a touch of interest to the normally boring. Vacdepot also offers CVS-I install kits with standard universal inlets and direct-connect electric inlets in both SuperValve and ElectraValve styles - see similar items tab for all options.

 THE U09200DV INSTALL KIT INCLUDES 
  • 9 Profyle Deco Inlet Valves
  • Your Choice of Finish & Color:
    • Solid White Smooth/Gloss
    • Solid Almond Smooth/Gloss
    • Solid Grey Smooth/Gloss
    • Solid Black Smooth/Gloss
    • Matte Finish Silver
    • Matte Finish Anthracite
    • Metallized Champagne
  • 9 Inlet Mounting Plates
  • 225 ft. Low Voltage Wire
  • 196.6ft 2" PVC Vacuum Tubing
  • (1) 4oz Can of PVC Cement
  • All Fittings ASTM-2158 - IAPMO/UMC
  • (16) 45° Elbows
  • (20) 90° Sweep Elbows
  • (10)  90° Sweep Tees
  • (4)  45° Wye
  • (35) Stop Couplings
  • (10) Short Elbows
  • (12) Spigot Adapters
  • (30) Pipe Straps
  • (30) 11" Cable Ties
  • Install Manual/Video CD-ROM

Compare CVS-I Installation Kits
Vacdepot offers CVS-I installation kits in sizes of 2 inlets up to 15 inlets. Each kit includes the industry standard number of fittings and components plus an extra 15% of material to cover most installation needs. All CVS-I kits include at minimum the industry average 20ft of tube per inlet. Some CVS-I kits are tube-heavy and can often accommodate an extra wall inlet or sweep inlet without the need for more tubing. Larger installations usually require less tube per inlet, depending on the layout.

COMPARE
CVS-I KITS
U0250RV
UNIVERSAL STANDARD
U03100RV
UNIVERSAL STANDARD
U05130RV
UNIVERSAL STANDARD
U07200RV
UNIVERSAL STANDARD
U09200RV
UNIVERSAL STANDARD
U11250RV
UNIVERSAL STANDARD
U15300RV
UNIVERSAL STANDARD
U0250DV
UNIVERSAL DECO
U03100DV
UNIVERSAL DECO
U05130DV
UNIVERSAL DECO
U07200DV
UNIVERSAL DECO
U09200DV
UNIVERSAL DECO
U11250DV
UNIVERSAL DECO
U15300DV
UNIVERSAL DECO
U0250SV
DIRECT SUPERVALVE
U03100SV
DIRECT SUPERVALVE
D05130SV
DIRECT SUPERVALVE
D07200SV
DIRECT SUPERVALVE
D09200SV
DIRECT SUPERVALVE
D11250SV
DIRECT SUPERVALVE
D15300SV
DIRECT SUPERVALVE
U0250EV
DIRECT ELECTRAVALVE

U03100EV
DIRECT ELECTRAVALVE

D05130EV
DIRECT ELECTRAVALVE

D07200EV
DIRECT ELECTRAVALVE

D09200EV
DIRECT ELECTRAVALVE

D11250EV
DIRECT ELECTRAVALVE

D15300EV
DIRECT ELECTRAVALVE

INLETS
TUBE FT.*
2 INLETS
50FT TUBE
3 INLETS
100FT TUBE
5 INLETS
130FT TUBE
7 INLETS
200FT TUBE
9 INLETS
200FT TUBE
11 INLETS
250FT TUBE
15 INLETS
300FT TUBE
COVERAGE**
EST. MIN-MAX
900SQFT -
1300SQFT
1350SQFT -
1950SQFT
2250SQFT -
3250SQFT
3150SQFT -
4550SQFT
4050SQFT -
5850SQFT
4950SQFT -
7950SQFT
6750SQFT -
9750SQFT
COST/INLET
(STANDARD)
$55.00 $51.60 $42.00 $41.43 $36.60 $32.50 $31.30
FEET OF TUBE
PER INLET*
25.0FT 33.0FT 25.0FT 28.5FT 22.0FT 22.7FT 20.0FT
*Nominal Feet of Tube.   **Based on min 450sqft and max 650sqft Coverage per Inlet.

Bonus CVS Tube Offer
If your CVS install is going to require more tube than is included in our standard package you can add a bonus vacuum tube to any CVS-I kit order and save 20% off our already discounted CVS tube pricing. There is a limit of 1 bonus bundle per CVS-I kit ordered and it must be purchased on the same order as the CVS-I kit using the drop-down "Bonus Pipe Offer" selection at the top of this page.

IAPMO R&T UMC COMPLIANT Tested, Inspected & Certified.
CVS-I kits include the components needed to install your new central vacuum in one specially designed kit. The CVS-I install kit includes intrasystem fittings, inlet components and install accessories. All CVS-I install kits use the finest available ASTM 2158 compliant materials from the industry's best manufacturers including Hayden, Vaculine, Plastiflex, Beldin, Panduit, API and more.

Vacdepot sources intrasystem fittings and 2" vacuum tube used in CVS-I install kits from IAPMO listees which are UMC compliant and all wire and cable ties are UL approved. Every CVS-I Do-It-Yourself central vacuum install kit comes with install manuals and video on CD-ROM that can be viewed on your PC or printed for easy reference along with additional product instructional materials and product video. And for safe delivery, CVS-I install kits include professional packaging for both the fittings and tube, using custom packaging that protects the pipe ends from chipping and damage in transit.

Standardized, Interchangeable & Expandable
Installation kits are available for various application sizes from 1000 sqft. up to 10,000 sqft and beyond. CVS-I Kits are rated for size by the number of valves and the length of tube included (i.e. model U05130RV includes 5 inlets & 130ft of tube). All install kits are able to inter-operate with any other CVS-I install kit with tube sold by Vacdepot and connect with any central vacuum system using standard 2" vacuum tube. Multiple kits may be added together to achieve the materials needed to cover a larger installation. All square foot ratings are estimates based on the amount of pipe and the number of inlets included, some installations may need more or less than the normal amount of materials due to the layout of the home or other special needs. Find the kit you need by measuring your application for the number of inlets required and roughly estimating the tube required for the complete system.

Wide Selection Of Inlets Styles and Colors Vacdepot DV series Install Kits
Central vacuum inlets are often thought of in the context of their function, a utility. This unfortunate label has plagued the central vacuum inlet design for many years. Instead of being noticed for their cleaning potential, central vacuum inlets are often recognized due to their out dated utilitarian design or their unattractive color pallet. Still today the 40+ year old round-door inlet design is used in new homes. Most round door inlets are installed by builders or contractors that are simply repeating the install process they have used for many years, not knowing that homeowners would really appreciate a more modern vacuum inlet.

The Profyle series DECO inlets offer a style that is interesting without being obtrusive. The convex shape gives the impression of the inlet rising from the wall. The door design uses a hidden hinge and does not require a pull tab. The Profyle inlet can be mounted in downward or upward opening direction and the inlet will always look the same. The Profyle inlet door opens 168° wide for easy use with any standard 1.5" central vacuum hose.

Standard low-volt wire connections are used with spring mounted contactors. Profyle inlets use a four bolt mount which allows all screws to be under the door and hidden from view. Each Profyle inlet is supplied with matching color screw hole covers. Once the inlet is mounted to the wall with the included screws, the screw hole cover snaps in place to completely conceal the screw heads and eliminate all thoughts of "utility". Profyle Inlets are available in 7 different color/finish options.

In addition to the U_DV series (Universal DECO Valve), Vacdepot also offers the U_RV series (Universal Regular Valve), D_SV series (Direct Super Valve) and D_EV series (Direct ElectraValve) install kits. Each install kit series includes it's own valve type in either Universal (low-volt only) or Direct (dual voltage inlet). See the similar items tab for all install kit options.

Wide Selection Of Inlets Styles and Colors The Universal Inlet type, also called a low-volt inlet, includes integrated low-voltage connectors that will control your central vacuum power unit with the hose. The Universal Inlet is used most often in homes of mostly hard flooring where brush nozzles or turbo cleaning attachments will be used. Universal inlets can also be installed in homes with carpeting when used in conjunction with dual-voltage Universal Connect (corded/pig-tail) power brush attachments kits. This arrangement lets you use an electrically powered brush by plugging a hose cord into any outlet nearby the Universal inlet.

Universal Inlets with powered brush applications are used most often in retrofit (pre-existing home) installations. If your new-construction home will contain large areas of wall-to-wall carpeting that you will clean with a powered brush system you should consider the even more convenient to use Direct Connect inlet style, available in both D_SV SuperValve and D_EV ElectraValve install kits - see similar items tab.

Which Kit Do You Need?
CVS-I installation kits differ in feet of tube per inlet. Most often the more inlets you install the less pipe you will use per inlet, with the average about 20 feet of tube per inlet. Each inlet will cover an estimated 450 - 650 sqft of floor space when using a 30-foot hose. While most installations will need just one install kit, some others may do better by mixing two kits to achieve the number of valves and length of tube you need. Be sure to add additional tube if you have a long run to your power unit, want to add an exterior exhaust or want to add a vacpan sweep inlet. It is almost impossible to have too many inlets, but having too few can defeat the entire convenience of using your new central vacuum system. If you are installing your first central vacuum system you might find our CVS Install FAQ helpful to read before you decide which install kit to order, just look under the related articles tab at the top of this page.
 

What's Not Included?
You will need a basic set of tools including a 2-3/8 or 2-1/2 inch diameter auger type (preferred) or bi-metal hole-saw type drill bit. A right angle drill is great if you have it, but not necessary in most installs. Common methods for cutting pipe include miter saw or miter box, any method for making straight cuts - just be sure to always debur your pipe cuts. Other components commonly used in CV installations are standard electrical tape for any low volt splices you may want to make and nail guards for new construction installations.

Wide Selection Of Inlets Styles and Colors CVS-I install kits also do not include a muffler, exhaust vent or any of the optional exhaust finish-out. Many CVS power units now include an exhaust muffler so check your model before you purchase an extra. The optional exhaust outlet (vent cover) is available in the accessories section. Exhausting your CVS is a good idea when possible, but optional for all power units except those which are fully cyclonic (unfiltered).

What Are Those Parts For?
Vacdepot's CVS-I installation kits are the most comprehensive in the industry. Our experience in the field has taught us which components will work best for your central vacuum install. All of the fittings and components in CVS-I install kits are the same parts our professional installers use everyday on the job. Most fittings have an obvious function and anyone familiar with PVC will immediately recognize the elbows and couplings used in central vacuum systems. Some fittings are vacuum system specific.

We have the complete list of what each part is named and what it does along with some helpful CVS install tips - just go to the next page.

CVS-I Install Kit Included Parts Defined

Central Vacuum Inlet Door Profyle DECO Universal Inlet Door (wall inlet, wall valve, inlet valve)
The inlet door is the finishing cover that acts as a valve where your cleaning hose is inserted into the vacuum tubing system. DECO inlets will measure approximately 3 inches wide by 5 inches tall, similar to outlets and switch plates. The inlet is opened to insert the hose and also holds the low volt contacts to activate the power unit. All modern inlets have 1.5" inside diameter openings with two low voltage contacts inside the opening. The low voltage contacts are connected to the low-volt wiring attached to each inlet and the vacuums power unit.

The DV Series installation kits include your color/finish choice of the Profyle universal inlet valve. The Profyle inlet doors are manufactured using high quality production and materials. Superior European production is evident in both the quality of design and the fit & finish of the final product. This decorators inlet offers a modern look with a sleek vertical convex shape that flows into the wall surface.

Profyle inlets are available in four gloss finish colors; White, Almond, Black or Grey. Two textured color inlets are available, Silver and Anthracite. Both with a durable matte finish, silver in a smooth coating and the Anthracite in a spec finish similar to natural stone. The Profyle Champagne color inlet is a metalized finish in tainted chrome which looks similar to a polished stainless steel finish. All Profyle inlets are made from durable ABS plastic and feature snap-in screw hole covers and mounting screws. View all Profyle inlet colors & finishes.

Vacdepot also offers the RV series installation kits with standard universal inlet doors. RV series installation kits include options of full door, round door and new side-opening inlets in your choice of color. See the similar items tab for the RV series universal installation kits.

 
Central Vacuum mounting bracket Mounting Plate (inlet mounting bracket, backplate)
The mounting plate is attached to a framing stud behind the drywall in new construction by use of its nailing fin with screws. The mounting plate serves as the connector between the inlet door and the vacuum tubing system. The mounting plate accepts a fitting in the back (a short 90° elbow) and has a o-ring seal 1.6" opening in the front.

The o-ring opening lets you attach the inlet door to the front of the mounting plate with screws instead of glue so that the inlet door may be removed in the future much like a switch cover plate. In retro fit (pre-existing homes) the nailing fin is removed from the mounting plate which is connected to the tube and elbow behind the wall. When the inlet door is connected to the mounting plate the two clamp around the drywall to hold the system in place. CVS-I kits include a high quality Vaculine mounting plate which is capable of using both 2-bolt and 4-bolt inlet doors and includes a removable steel flange for retrofit use.

 
Central Vacuum PVC tubing 2" PVC Vacuum Tubing, ASTM-F2158 Compliant
Central Vacuum Systems use a special size and design tube to carry air and debris to the power unit, which is also the collection system that is remotely mounted usually in an attached garage, basement or utility room. All modern CVS PVC is 2.0 inches outside diameter with a .06" thin wall which differs from typical plumbing pipe. CVS-PVC is an extruded pipe much like regular plumbing PVC with a special smooth bore interior. Vacdepot uses IAPMO certified manufacturers which produce vacuum system tubing to the ASTM-F2158 standard. All CVS-I central vacuum tubing is sold in 4'11" (59 total inches) sections referred to nominally as a 5ft stick. Our new 5' sticks are easy to handle, easy to transport and easy to use on the job in attics, service paths, crawl spaces and other tight areas.
 
Central Vacuum Low Volt wire Low-Voltage CMG Signal Wire
The low volt wire in a central vacuum system is used to signal the power unit (suction motor) from the wall inlet. Our CSA approved wire is two jacketed solid 22 gauge copper wires in a CMG style PVC outer jacket. Our low-volt wire is round with internal support for easier pulling over and around objects without snagging. Our wire is rolled for easy dispensing and the flexible 22 gauge goes where you want it and stays there. In most installations the signal wire is run next to the pipe system to enable easy inspection of the signal wire. Wire lengths can be spliced with wire nuts or crimps and electric tape.
 
Central Vacuum PVC cement PVC Cement
CVS-I kits may include Vacuflo brand All-Weather, IPS Weld-On brand PVC710 or equivalent. Clear PVC Cement is a regular-bodied and fast setting PVC for all classes of 2-inch PVC tube. Comes in four ounces metal cans with applicator attached to the lid. One 4 ounce can will cover most applications up to 200 linear feet of pipe and 10 inlets. When gluing CVS-PVC always apply glue to the male side of the connection (pipe or spigot), not the inside of a fitting where it may build up and degrade airflow. Always use fast-set cement for vacuum systems, but do not use special "hot" glues.
 
Central Vacuum PVC fitting 45° Elbow (ASTM-F2158 / UMC)
The CV5517W 45 degree elbow is the most important elbow fitting in your central vacuum tube system. Makes pipe connections at standard 45 degree angle, safe for intrasystem use (in-wall and attic locations). Using the 45 elbow you can change the direction of airflow with the least impact on your systems performance. Full depth SOCKET type connection on both ends for direct pipe connection. Also available the CV5519W 30° elbow and the CV5538W 38° elbow fittings for angles also used in home construction.
 
Central Vacuum PVC fitting 90° Sweep Elbow (ASTM-F2158 / UMC)
The CV5510W 90 degree sweep elbow makes pipe connections at standard 90 degree angle, safe for intrasystem use (in-wall and attic locations). The sweep elbow makes long radius turns to maintain airflow and prevent blockages intra-system. Full depth SOCKET type connection on both ends for connection directly with vacuum tube.
 
Central Vacuum PVC fitting 90° Sweep Tee (ASTM-F2158 / UMC)
The CV5501W 90 degree sweep tee provides a 90 degree branch (3 connection) fitting that is swept for safe use intra-system. Sweep Tee's are used most often in branch lines to connect a drop or rise into the trunk line. Full depth SOCKET type connection on all ends for direct connection to vacuum tube.
 
Central Vacuum PVC fitting 45° Wye (ASTM-F2158 / UMC)
The CV5525W 45 degree wye is an excellent low resistance fitting that provides three tube connections. One set of tube connections passes through the fitting with the other intersecting the fitting at a 45° angle. Often used in similar locations as the 90 sweep tee including branch lines connecting a drop or rise into the main trunk. Full depth SOCKET type connection on both ends for direct pipe connection.
 
Central Vacuum PVC fitting Tube Coupling with Stop (ASTM-F2158 / UMC)
The CV5529W stop coupling joins two lengths of vacuum tube together continuously. Used to create straight tube runs. The stop coupling has a centered rib to ensure both tube ends get equal glue surface. Each tube union will require a coupling, however not every tube will end in a union with another tube. Full depth SOCKET type connection on both ends for direct pipe connection.
 
Central Vacuum PVC fitting Spigot Adapter (ASTM-F2158 / UMC)
The CV5527 spigot adapter is a convenience fitting that lets you join two SOCKET type fittings together to create a custom fitting. Spigot adapters work much like a short piece of tube that is used to connect two fittings together. Spigot adapters convert any SOCKET type fitting, safe for intra-system use. Full depth SPIGOT type connection on both ends for direct connection to fittings.
 
Central Vacuum PVC fitting 90°Universal Short Elbow (ASTM-F2158 / UMC)
The CV5506W 90 degree universal elbow is short and compact in size and is designed to be used only for connecting the mounting plate of an inlet to the tube system within the wall. The short, tight turn of this elbow is designed to fit within a 2X4 stud wall when used in one direction and when turned the other direction it is designed to fit a 2X3 stud wall. The special design of this elbow works to prevent long objects from entering the tube system. This design also means you should never use short 90 elbows intrasystem because of their clog potential. Each CVS-I installation kit includes a number of short 90 elbows equivalent to the number of inlets plus one extra for backup (two extra for large kits). Full depth special SOCKET type connection on both ends for direct tube and mounting plate connection.
 
Central Vacuum PVC fitting Tube Strap
The CV5545W tube strap for mounting and tube support. The CV5545W fits over vacuum tube and screws to the mounting surface with two fasteners. CVS pipe should be secured every 4 - 5 feet in most installations.
 
Central Vacuum PVC fitting 11" Cable Ties UL Approved
From Leco, Panduit or equivalent the 11 inch cable tie is perfect for securing your low volt wire run to your 2" tubing system. Excellent for areas when tube is running against studs and the low volt wire cannot be taped. Easy to use "zip-tie" cable fastener is UV stabilized.
 
Central Vacuum PVC fitting Vacdepot Installation & Products Information CD-ROM (Manuals & Video)
Available exclusively from Vacdepot, this installation CD-ROM includes multiple brands of general installation manuals that cover both new and pre-existing installations, a 17 minute installation video in both windows media (.wmv) and universal mpeg (.mpg) file formats and product specific manuals including Vacpan, SuperValve and Hide-A-Hose instruction sheets. All instructions and manuals are in PDF format and printable from the CD-ROM for use while you're installing. Our installation CD-ROM also includes product information and manuals from a number of manufacturers. An all-inclusive resource that covers every part of a central vacuum installation from novice to experienced do-it-yourselfer.

Vacdepot packs our CVS-I installation kits with the industry's very best quality components, our comprehensive install CD and our decades of CVS experience. Our commitment does not end when the kit is delivered. Vacdepot CV installers are available to help by phone or email with your questions. Purchasing a CVS-I install kit means you will receive the best components and service in central cleaning systems.  

Similar Items to U09200DV 9 DECO Inlet Install Kit w-Tube April 2014

® 9 Standard Inlet Install Kit w/Tube
CVS-I® U09200RV

9 Standard Inlet Install Kit w/Tube
[More Info]
® 9 ElectraValve Inlet Install Kit w/Tube
CVS-I® D09200EV

9 ElectraValve Inlet Install Kit w/Tube
[More Info]
® 9 SuperValve Inlet Install Kit w/Tube
CVS-I® D09200SV

9 SuperValve Inlet Install Kit w/Tube
[More Info]
 
  Tuesday | 15th April, 2014 Vacdepot Online since 27 December 1995   

Vacdepot VDTA Member
info@vacdepot.com | 888-822-8863 | Home Page | The Suction Blog
Conditions of Use | Security & Privacy Notice © 1995-2014, Vacdepot, Inc.