|
www.vacdepot.com | |||||||||||
Find the Aspria CV6855-PT On Vacdepot!
Our CV6855 includes everything you need to clean all surfaces in any size home.
The perfect upgrade to a builders grade attachment kit, the CV6855 Premium truly lives up to its name, Premium. Suitable for cleaning all carpeting types and every hard floor surface the Aspria Premium CVS attachment kit will clean homes of every size from small condo to multi-level mansion.
Our Premium CVS attachment group is built upon the base component of any good carpet cleaning CVS: the powered brush. While a central vacuum power unit's suction motor can have as much as 5 times the power of a portable vacuum cleaner, when it comes time to deep clean carpets and rugs it is the electrically driven power brush that will contribute nearly 70% of the total cleaning performance. Not by coincidence, our Premium CVS attachment group includes one of the best power brushes available anywhere, the Wessel-Werk Model EBK340-QDC Power Brush.
The Wessel-Werk EBK340-QDC has been in use for over a dozen different nameplates of canister and central vacuums both foreign and domestic for over 6 years. Finally, after a long wait (and some begging) the EBK340 has become available to the central vacuum market in the Aspria CV6855 Premium Attachment Kit. The measure by which all other power brushes should be judged, the EBK340-QDC has the power and features needed to clean carpeting of any type, and of any quantity. There are many special components that lend themselves to the EBK340-QDC's phenomenal cleaning ability. Perhaps most importantly, the EBK340-QDC uses the most reliable power transmission system in use today: the Geared Belt Drive. Transferring the full power of the brush motor to the spinning brush (and furthermore to your carpets) is what sets this power brush apart from the others.
The geared belt (sometimes called "cogged" or "toothed", colored red in the photo below) far surpasses traditional flat belt products because it does not rely on the stored tension of rubber to transfer the motor's power to the brush roll.
Spinning the brush fast is one of the most important factors of power brush carpet cleaning. Faster brushes increase the bristle contact to the carpet fibers for better brushing action. It also increases agitation to bring embedded soil to the surface, at the same time creating an auger action that reduces the tendency to spatter, unlike slower brushes that tend to spread dirt around before it can be pulled into the vacuum's air stream. This single feature and benefit is so important we have devoted an entire article to the subject along with a in-depth look inside the EBK340-QDC, see the article EBK340-QDC: GEARED AGAINST THE MACHINE.
Never Fail Belt System
With the EBK340-QDC you need only remove the obstruction, plug in your vacuum and start cleaning again. Equipped with two top mounted LED indicator lights you will always know when your brush is operating correctly as with a green indicator, or when the brush action has stopped as signaled by a red light. With some older vacuums the brush roller belt runs in "dirty air", the same path where vacuumed debris travels to the bag. The EBK340-QDC's belt rides in its own clean path, away from paper clips and staples. And because the geared belt system does not rely on large flat surface contact to drive the brush you have more space under the nozzle for cleaning brushes, plus better edge cleaning on both sides.
The EBK340-QDC has other features that directly effect the use of the nozzle including the full tilt/swivel QDC connector. Allowing for a full range of motion, the nozzle connector will tilt completely back to the floor and swivel fully from left to right, allowing easy nozzle driving by the user. The nozzle connector locks into the upright position for quick parking while in use, so you can easily pause your cleaning to answer the door or move an object from your cleaning path.
The nozzle's bottom plate is equipped with four independent wheels. Two front "helper" wheels assist in transferring the nozzle from one surface to another, easily navigating transitions including thresholds. Set on independent and lubricated steel axles the rear wheels are over-width for smooth movement on even the thickest of pile carpeting. Differing from other nozzles, the EBK340-QDC rear wheels and axles are connected together and rotate within the nozzle's main body, similar to the rear wheels of an automobile.
No more squeaky wheels, no wheels "snapping off" their plastic mounts. Furthermore the bottom plate is void of floor damaging protrusions with all metal screw heads recessed and wheels that are covered with a soft vinyl tread. The EBK340-QDC is well at home on hard surfaces too and great for vacuuming mattresses to remove dust mites safely and easily.
Leave it to Wessel-Werk to enhance every part of the Power Brush, even the headlight. Overlooked by other manufacturers, a vacuum systems headlight can be a source of frustration for many. With a headlight on the power brush you can see the path ahead and illuminate dark areas such as under beds and behind doors or in closets - avoiding objects on the floor and shining light on spots that need to be cleaned. While other power brushes still use a regular glass bulb with a thin filament that burns out the first time the vacuums nozzle is bumped too hard, Wessel-Werk uses a fluorescent bulb that burns bright and is not subject to stress breaks. The florescent element also lasts much longer than regular bulbs and generates less heat during use. While not as critical as motor or belt design the fluorescent bulb is a welcomed advantage in the EBK340-QDC.
The EBK340-QDC is constructed with precision components, which are balanced for vibration and noise, lending to quiet use of a central cleaning system. Even the power brush body is balanced for truly straight tracking and the wide 13.5" (340mm) cleaning path remains highly mobile thanks to the full tilt, swivel connector. The EBK340-QDC is an outstanding asset for any CVS system, and will greatly increase the carpet cleaning performance of both new and older CV Systems.
CV6855-PT Standard Connect Hose
This type of connection fits most wall valves on the market today where power for electric attachments is not supplied directly by the CV wall plate. Our
universal corded hose is designed to work with all standard wall plates, even some of those that were installed years ago and those that may not have originally
included a powered attachment group. If you are unsure which hose and attachment kit you need for your current system, or which type you should install for
a new system then please read our article linked below titled CENTRAL VACUUM HOSES AND INLETS EXPLAINED
Standard connection is generally the preferred inlet valve type for retrofitting installations (new central vacuum install, pre-existing home). This type of installation does not require that you also run 120V wiring to each valve, only a low-voltage signal wire that is used in all CVS installations. To use the Central Vacuum System with standard connection valve and corded hose you need only plug in your hose to the wall. When you need to supply electricity to the powered brush for cleaning carpets just plug in the cord that is connected to the hose wall cuff to an electrical outlet somewhere nearby. The pigtail cord on the hose is 7 feet long, and can easily stretch across a hallway if needed. The CV6855 series is also available in model CV6855-DC with a direct connection wall end. If you are not sure which style you need, just give us a call or send an email.
The 30ft. & 360° CVS Hose The hose-to-grip connection has a full 360° swivel union that keeps you tangle free while moving about room to room, and the fingertip switch is 3 position giving you complete control over the remote suction unit and the powered brush. The switch has a center off position, move the switch in one direction to turn on the power unit for straight suction cleaning or to clean hard floors.
New 35' hose upgrade option available at order.
If you would like to upgrade your new CV6855 to 35ft just use the pull down menu above the add-to-cart button at the top of this webpage. Please keep in mind that the 35ft hose upgrade can only be purchased at the same time you purchase your new CV6855 kit.
The new Myraton QDC tele-wand has incredibly smooth slide action. The new latching mechanism gives a firm lock that does not slip and is easy to set. The new adjustable wand also has a redesigned interior that is smooth to reduce debris snags and increase airflow. Sealed from the dirt and dust passing through the wand itself, the telescopic action is completely maintenance free. The ultimate in power brush convenience, the Myraton telescopic wand features a quick disconnect system that enables you to easily remove the power brush from the system. In this QDC system the cord remains with the wand where connectors on each end allow it to be unplugged from the power brush at the bottom or from the hose grip at the top. This allows you to switch cleaning tools from any connector without having to unplug cords or remove connectors.
The lower "stationary" part of the wand system includes the more reliable rivet down steel lock pin that works with the QDC to keep the wand engaged into the EBK340-QDC power brush. The QDC connector is mounted to the wand and two soft nylon cord keepers come preinstalled with the coiled power cord on the wand. The upper section of the power nozzle cord is a stretch type coil, similar to a telephone handset cord, providing tension while in the cleaning position. The top of the telescopic wand includes an easy release tab (called a thumb saver) to quickly disengage the hose from the wand and a small crease at the top of the extension tube that centers and lowers the hose button lock for easy attachment. The back of the upper wand holds the permanently riveted Plastiflex Cord Management connector. This cord connection collar holds the coiled power cord in a ready-mounted position for quick connection to the hose grip. Simply attach the hose to the wand and the power nozzle's cord is automatically plugged in for you. Pushing the release tab on the front of the wand lets you quickly detach the wand from the hose, no fiddling with a cord plug. A feature highly prized by central vacuumer's, the quick attach cord management system makes changing from one tool to another at the hose grip fast and easy.
The FT-855 is a heavy-duty floor brush suitable for home or commercial use. The expansive working width provides excellent coverage in large areas and is also very maneuverable with a full swivel neck.
The new telescopic wand has a durable black finish and adjusts fully from 22 inches to 39 inches in 1 inch increments. The latching mechanism is a positive ratchet giving a firmer lock into the desired height allowing the tool to be resized on the fly for the user. The latching system is internally sealed from the dirt control tube for perfect air-flow with no catches and the hose end features a nylon collar for quick and easy connections. Imagine cleaning stairs with a compressed wand that does not require you to hold your arm up to vacuum - less fatigue and much safer.
In every cleaning action, it is the tool at the direction of the user that gets the job done. Quality above the floor cleaning tools, just as with the FT-855 hard floor brush, not only get the job done faster but get it done better. The cleaning tool is where the suction meets the dirt and you need the best connection design between the two for superior performance. We had many choices available in this area and we selected the best for inclusion in our custom kit. To start with we replaced the regular round dusting brush with our professional dusting tool aptly named the Ultimate Dusting Brush; Wessel-Werk model UDB174-32. The UDB174 dusting tool is the nozzle we also ship with our commercial backpack vacuum systems for heavy duty cleaning where it is prized by maid services and professional cleaners.
With one tool, Wessel-Werk has addressed all the deficiencies of regular dusting brushes. The cleaning face has been shaped for the way people clean. The UDB has a five-inch cleaning depth with a 1.5 inch protected opening. The elongated service end of the tool has nearly twice the cleaning area of standard dusting brushes letting the user do more work in a single pass. The top of the UDB is also tapered and the bristles swept forward letting you clean into corners and reach areas inaccessible to other tools; and the suction opening is tapered so suction is evenly distributed the whole length of the tool. There are 68 individual tufts mounted in a double offset row to the chassis with raised connectors to hold the bristles securely to the tool. The soft bristles are longer to flex as the tool passes over the object being cleaned, using stored tension in the bending bristle to knock dust particles off the surface and into the air stream. The poly bristles and heavy-duty housing are also water washable and fit easily in the top rack of your dishwasher.
The brush also helps to remove hair, pet fur, lint and other clingy soils that suction alone will not remove. The soft outer cover will not mar light colored furniture or scratch soft surfaces and the friction fitting connector will allow use directly at the end of the hose or with any wand extension.
Our unique crevice tool is 13" (330mm) long with flat profile and slots for those "hard-to-reach" corners and crevices where dust and debris can hide.
Most often crevice tools are used for cleaning areas and objects never conceived of by the engineers, and are jammed into, next to, under and between anything and everything.
Realizing long ago that crevice tools are used often, and often abused, the crevice tool was redesigned to stand up to rigorous use. The extra length of the crevice nozzle, a full 13 inches, helps you to continue jamming, pushing and prying the crevice tool wherever you need to clean.
Now you can add all three wand sets together and easily clean the crown molding in a room with 14-foot ceilings. The black ABS wands can be used in any combination directly on the hose grip to give you just the right reach for cleaning your car, sofa or under the refrigerator with the extra long crevice tool. The cob webs in the corner will have no way to escape the cleaning reach you have with the Aspria Premium attachment kit.
The Wessel-Werk PT160 Turbo tool is another German built marvel and uses the air stream produced by the CVS power unit to turn the brush roll, adding agitation without the use of electricity. As central vacuum system power units generally produce significantly more airflow than portable vacuum cleaners, the PT160 turbo brush works particularly well in the CV6855 attachment kit.
The turbine system is not new technology and has been in use for quite a number of years. What is new about this system is the overall size of the tool. The width of the cleaning nozzle is just 6". The nozzle depth is just 2" with a full tool length of only 8". The small size of this tool allows you to reach areas such as on the stairs where a full power nozzle will not fit. The Turbo hand tool is most often considered an extra accessory, priced at $30. - $50. or more, but the CV6855 attachment group includes this great attachment.
Premium Storage To keep your tools in reach while you clean floors, the CV6855 includes the wand mount tool caddie to keep your three above the floor tools on hand, ready for use. The wand caddie snaps onto the telescopic wand and provides three connectors to store the dust brush, crevice tool and upholstery nozzle. If you prefer, the wand caddie can also attach to the ultra-light telescopic instead. Having your basic 3 in reach at all times can increase efficiency and give you the opportunity to do detail cleaning when needed. To keep all of your tools neat and tidy, storage is provided via a soft fabric storage bag with pockets for the dusting brush, upholstery nozzle and crevice tool. There are two side pockets for the two utility wands and a larger center pocket that is large enough to store the FT-855 floor brush and the Wessel-Werk turbo brush together. The fabric storage features a strong loop of nylon at the top so the bag can hang on a hook in your storage closet or you can hang the loop over a coat hanger and store the tools on a closet rod. Easy to transport, the fabric storage bag is an easy way to move all your tools to the area being cleaned, instead of walking back and forth to your storage closet to retrieve one tool at a time. An extra large hose hanger provides hose storage. Made of polypropylene and matched to the CV6855 attachment group, the hose hanger provides plenty of space to keep your hose coiled up off the floor, preventing damage.
Providing for complete "off the floor" accessory storage the CV6855 attachment group from Vacdepot.com includes a wall mount wand holder. Theis unique device mount directly to the wall with included screws or wall anchors and features a flexing, pivoting rubber strap. To store the telescopic wand just push the wand into the rubber strap and it locks into place supporting the full weight of wand and nozzle, hanging on the wall and out of the way. The complete CV6855 attachment group can be stored in the smallest of spaces easily and will not clutter up the floor. The included storage devices will help you keep your Premium cleaning system organized, easy to find and accessible, and prevent external damage or loss - two of the most common problems with CVS attachments. From the Plastiflex 30ft 1 3/8" power hose, to the EBK340-QDC Power brush, and the 14 other tools and accessories included, the CV6855 Attachment Group includes everything you need to clean your home, perfectly. Making the convenience of Central Vacuuming a reality this attachment group is easy to use, easy to store and gives you the deep cleaning results you expect from your time spent cleaning.
A custom solution for central vacuum systems including tools that are perfectly matched to their task and to each other, the CV6855 is a best of breed kit that offers the ultimate performance.
| ||||||||||||
|
![]() Airvac® VM2200DS [More Info] | ![]() Beam® 012247 [More Info] | ![]() Aspria® CV6855-DC [More Info] |
![]() Cen-Tec Systems® CVA72-PT [More Info] | ![]() Aspria® CVA360U [More Info] | ![]() Aspria® CVA360D [More Info] |
![]() Aspria® CVA360 [More Info] | ||
| Saturday, 4th February, 2012 | 40224233 requests since 27-Dec-95 |
Conditions of Use | Security & Privacy Notice © 1995-2012, Vacdepot, Inc. |
|